This is a tankless air cup system meaning that the compressor turns on when you want to lift and directly feeds the air cups. Please note that this tankless kit is suited to lift only the front or rear, not both. It will take about 5 seconds to lift which is a fair bit slower than a kit with a tank which takes only around 1 second. The advantage is that you will save boot space as you won't need to mount an air tank.

This kit includes:
• 2 air cups
• 10 meters airline
• t-splitter
• 12v 3-way valve
• Pre-wired 16mm LED switch
• VIAIR 400c compressor setup
• Connecting material

2 year warranty on the air cups.

1 year warranty on the compressor setup, covered by the manufacturer: VIAIR.

Click here for an online view of the manual.

Click here to see a dimensional drawing of the compressor.

Make sure you have enough clearance around the coilovers. The air cups are 120mm in diameter, and the fitting is 17mm. 110mm diameter aircups are available to assist with fitment on vehicles with less clearance. Take care with measuring and selecting your sizes when ordering, ensuring your vehicle will have adequate clearance using the fitment instructions linked below.

Please note the following important guidelines for Stanceparts aircups:

• The system should only be used to pass obstacles, not to be driven constantly lifted. 

• The system should only be used at speeds below 60 kmh / 40mph. 

• Fitment and installation instruction can be found here: Stanceparts Fitment